Milking Equipment

Details: 

The Advantages of Silclear Silicone:

Silicone

  • Long Life- It is tough, strong and flexible. It retains its physical properties -80° C to +180° (-112°F to +356°F).
  • No cracking / perishing It does not erode when chemical sterilisers or milk stone remover are used, and it is not affected by ultraviolet light.
  • Easily Cleaned- Smooth surfaces are easily hosed down which saves time.
  • Does not support bacterial growth- It helps eliminate your milk tubes as a source of bacterial contamination. Silicone is used in surgical and food processes- rubber is not.
  • Well proven and tested- Dynamic tests have shown improved milk flow and increased plant efficiency.
  • Easier and faster fitting- No pre heating required.
  • Versatile- Sizes available to suit all milk/vacuum/transfer tubes etc. Fits all types of parlour.
  • No Leachable Additives- only the highest grade, pure silicone materials are used in our manufacturing processes, resulting in clear tube which does not go cloudy like plastic, allowing milk flow to be observed.
  • Cost-effective- Will save you money and time.

 

Full Details: 

Silicone Products

Milk Tubing:

 

14 mm × 24mm
Main milk tube from the jar to the cluster. This size tends to fit the older style and those with the metal milk outflow pipes

16 mm × 26mm
Main milk tube from the jar to the cluster. This size tends to fit the more modern style cluster with the larger milk overflow pipes.

19 mm × 29mm 

22 mm × 34 mm 
Designed for use beyond the jar to connect up with the main transfer tubing. This tubing can be used successfully 'around bends' without cracking, perishing, or kinking, (can save the need to but expensive moulded angles in many cases).

 

Pulsation Tubing:

 

7 mm × 15 mm
Designed for use as short pulse tubing with increased wall thickness to give strength where it is needed most- near the cows feet! 7 mm × 14 mm (Double)
For those parlours with a single line system- with both air lines in one tube, help reduce tangles.

9 mm × 17 mm
For those parlours with a single line system. Can also be used for short milk and pulse tubes on some systems.

10 mm × 18mm

6mm ×12mm

NOTE

Although pulse tubing does not come into contact with the milk, many dairy farmers have found Silclear's pulse tubing a great advantage because it is so easy to keep clean, does not crack or perish with age, and it is fully flexible in cold weather.

Milk and Vacuum tubing supplied in 20 metre rolls.Shorter lengths available- details on request.

 

Large Bore Tubing:

28mm 42mm
Tough, durable tubing for use along the milk lane. Built to withstand the vacuum system and negative pressure. Also suitable for connection to plate coolers and for wash thorough, systems etc.

28mm 40mm

28mm 38mm
Economy option for connection to 32mm spigots on the positive pressure side of the pump where reinforcement is not needed, i.e.. for use beyond the pump and onto the bulk tank.

Dairy Rings
Cut silicone rings to hold any combination of 1 milk pulse tube together but loose enough to be moved for cleaning

 

 

32mm Fittings

 
(T1)
(T2) 
(E1)
(B1)
(T8)
(T3)
(T5)
(T6)
(F1)
(C1)
Equal Tee
Long Equal Tee
Elbow
Long Bend
Swept in Line Tee
Jar Bottom Tee
Jar Bottom Tee incl. Tap&Reducer
Jar Bottom Tee incl. Tap B&B/L
Butterfly Valve
Straight Connector
Long Bend (B1)
Long Bend (B1)
Elbow (E2)
Elbow (E2)
 

40mm fittings

 
(E2)
(B3)
(T9)
(T10)
(T11)
(T12)
(F2)
(C2)
Elbow
Long Bend
Equal Tee
Jar Bottom Tee
Jar Bottom Tee incl. Tap Reducer
Jar Bottom tee incl. Tap& Reducer B&B/L
Butterfly Valves
Straight Connector
Elbow (E1)
Elbow (E1)
Keeper Rings (A1)
Keeper Rings (A1)
 

50mm fittings

 
(C3)
(A75)
Straight Connector
Taps 19.5m
Long Tail Bend (B8)
Long Tail Bend (B8)
 

ACCESSORIES

 
(B8)
(CA7)
(L1)
(LS1)
(LLS4)
(TY)
(A1)
(A5)
(A8)
Long Tail 90 Bend 16mm*6"
Short Pulse Tubing
Silclear Lining
Clear Shell for Silclear Liner
Set of 4 Liners & Shells complete
Pulse Y Tube
Dairy Rings
Springs
Diaphram White
Springs (A5)
Springs (A5)
Diaphram (A8)
Diaphram (A8)
     

 

 

Also available are polysulphane reducer inserts for 32mm fitting down to 19mm, 16mm and 14mm.